(11) 2088-5701
ASFEL
20 Kg
Modified asphalt obtained through the distillation of CAP (petroleum asphalt cement) and modified with polymers. It is applied hot and has flexibility at low temperatures.
Suitable for: bonding thermal insulation, asphalt blankets, as well as for hot molding in loco of asphalt membrane.
The surface must be clean, free of oil and grease. In case of surface irregularity, use cement and sand mortar, trace 1: 4, adding DRYKOFIX CHAPISCO in the mixing water, for greater adherence to the substrate.
Wait at least 7 days to cure.
Apply one coat of DRYKOPRIMER ACQUA or DRYKOPRIMER ECO.
Remove excess paper bag; Heat an appropriate boiler between 160 and 210 ° C; Add ASFEL and wait for the merger.
DIRECT FLAME HEATING IS NOT RECOMMENDED.
Waterproofing Apply with vegetable fiber brush (skein) on the printed surface, align the structuring agent (fiberglass, polyester) and continue the application until it reaches consumption.
Bonding asphalt blankets On the printed surface, apply ASFEL and simultaneously roll up the blanket, applying pressure from the center to the edges in order to expel air bubbles. Do not exceed half a meter away from the blanket, as this prevents the product from cooling. Joints On the printed surface, fill the joint with ASFEL.
Validity of the product is 24 months from the date of manufacture, provided that it is stored in an upright position, in its original and intact packaging, in a dry, well-ventilated place and away from heat under a maximum temperature of 30 ºC. We guarantee the quality of our products against manufacturing defects.
We do not assume responsibility for the poor performance of the work due to incorrect use and because we do not have direct control over the application. The product must be applied by a qualified professional and in accordance with the instructions in our technical bulletin and in the Product Safety Data Sheet.
We recommend observing the safety rules established by the competent bodies and the use of suitable PPE such as gloves and safety glasses.
In poorly ventilated environments, promote forced ventilation.
The product should not be ingested or come into contact with the skin or eyes.
In case of accidental ingestion, do not force vomit. In contact with eyes, rinse well with water for an average of 10 to 15 minutes. In contact with the skin, wash well with soap and water and use moisturizer. Do not remove the product. Search for a doctor.
Keep out of reach of children and animals.
Not suitable for application in closed places, if necessary to create forced ventilation.
